TM 5-2420-230-24-1
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment and injury or death to personnel may occur.
(1)
Remove bolts (1), mounting plate (2),
nuts (3), clamp (4), and bracket (5) on mirror
mounting bracket (6).
(2)
Remove screws (7) and bracket (5) from
light fixture (8).
(3)
Remove protective cover (9) from light
fixture (8).
(4)
Disconnect wires (10) from light fixture (8).
(5)
If required, remove bulb (11) from light
fixture (8). Discard bulb (11).
b. Installation.
NOTE
Install cable ties as necessary.
(1)
If required, install new bulb (11) on light
fixture (8).
(2)
Connect wires (10) to light fixture (8).
(3)
Install protective cover (9) on light fixture (8).
(4)
Install screws (7) and bracket (5) on light fixture (8).
(5)
Install bolts (1), mounting plate (2), nuts (3), clamp (4), and bracket (5) on mirror mounting bracket (6).
c. Follow-On Maintenance.
(1)
Place electrical master switch in ON position (TM 5-2420-230-10).
(2)
Functionally test mirror mounted clearance light (TM 5-2420-230-10).
(3)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
12-93
Change 1