TM 5-2420-230-24-1
a. Disassembly.
(1)
Remove knob (1), boss (2), and T-bar (3) from
bracket (4).
(2)
Disconnect electrical harness connections (5) from
blackout marker (6) and blackout drive light (7).
(3)
Remove bolt (8), washer (9), and blackout drive
light (7) from bracket (4).
(4)
Remove two self-locking nuts (10), washers (11),
and blackout marker (6) from bracket (4). Discard
self-locking nut.
(5)
Loosen two nuts (12) on vision rod (13) and
remove ball (14) from vision rod.
(6)
Remove self-locking nut (15) and flat washer (16)
from vision rod (13). Discard self-locking nut.
(7)
Remove vision rod (13) and rubber mount (17)
from grill (18).
(8)
Remove rubber mount (17) from vision rod (13).
(9)
Remove two nuts (12) from vision rod (13).
(10) Remove four screws (19), lockwashers (20), and
grill (18) from bracket (4). Discard lockwashers.
(11) Remove four bolts (21), lockwashers (22), and flat
washers (23) from bracket (4) and drive light (24).
Discard lockwashers.
b. Assembly.
(1)
Install drive light (24) on bracket (4) with four flat
washers (23), new lockwashers (22), and
bolts (21).
(2)
Install grill (18) on bracket (4) with four new
lockwashers (20) and screws (19).
(3)
Install two nuts (12), ball (14), and rubber mount (17) on vision rod (13).
(4)
Install vision rod (13) on grill (18) with flat washer (16) and new self-locking nut (15). Tighten nuts (12).
(5)
Install blackout marker (6) on bracket (4) with two washers (11) and new self-locking nuts (10).
(6)
Install blackout drive light (7) on bracket (4) with washer (9) and bolt (8).
(7)
Connect electrical harness connections (5) to blackout marker (6) and blackout drive light (7).
(8)
Install T-bar (3) on bracket (4) with boss (2) and knob (1).
c. Follow-On Maintenance.
Install headlight (TM 5-2420-230-10).
END OF TASK
12-89
Change 1
