TM 5-2420-230-24-1
c. Follow-On Maintenance.
(1)
Place electrical master switch in ON position (TM 5-2420-230-10).
(2)
Place ignition switch in ON position
(3)
Functionally test marker lights (TM 5-2420-230-10).
(4)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
12-43. MIRROR CLEARANCE LIGHT REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
Tags, Identification, Item 63, Appendix C
"Do Not Operate" tag attached
Ties, cable, Item 68, Appendix C
to ignition switch.
Personnel Required
Drawings Required
MOS 62B, Construction Equipment Repairer
TM 5-2420-230-24P Figure 59
References
Estimated Time to Complete Task
None
Refer to MAC in Appendix B
a. Removal.
NOTE
Left and right mirror clearance lights remove the same way. Left side shown.
Tag all wires and note their positions before removal.
Remove cable ties as necessary.
Change 1
