TM 5-2420-230-24-1
(1)
Remove air lines (1) by pushing in on brass
coupling (2) and pulling air line at the same time.
(2)
Remove fitting (3) from air valve (4).
(3)
Remove bolts (5) and washers (6) from air
valve (4).
b. Installation.
(1)
Position air valve (4) and install washers (6) and
bolts (5).
(2)
Install fittings (3) on air valve (4).
(3)
Install air lines (1) by pushing in on brass
coupling (2) and air lines at the same time.
c. Follow-On Maintenance.
(1)
Start engine and functionally test appropriate
pneumatic systems (TM 5-2420-230-10).
(2)
Shut OFF engine (TM 5-2420-230-10).
(3)
Install belly plates, if required (TM 5-2420-230-10).
(4)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
15-6. AIR TANK REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Belly plates removed, as
needed.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Air system drained.
Air lines removed.
Materials/Parts
Nut, self-locking, Item 104, Appendix D (4)
Drawings Required
Tags, identification, Item 63, Appendix C
Figure 126
Ties, cable, Item 68, Appendix C
Figure 127
Figure 128
Figure 129
Personnel Required
MOS 62B, Construction Equipment Repairer
Figure 130
Figure 131
References
None
Estimated Time to Complete Task
Refer to MAC in Appendix B
Change 1