TM 5-3805-294-23-1
0019
Table 1. DTC 97.04 - Water in Fuel Signal Out of Range Low - Continued.
Test or Inspection
Corrective Action
Malfunction
Check fuel supply quality.
1.
If fuel supply quality is
7.
Fuel Supply
unacceptable, drain sediment
Quality.
and fill fuel tank TM
5-3805-294-10. (Volume 5,
WP 0794) Restore machine to
original condition and perform
Harness Diagnostic Mode
Test. (Volume 3, WP 0345)
2.
If fuel supply quality is
acceptable, proceed to
Malfunction 8.
1.
Turn key switch to ON position,
8.
Intermittent Short
but DO NOT START ENGINE
to Ground.
(TM 5-3805-294-10). (Volume
5, WP 0794)
2.
Select Readings and select
Connect to Model(s). (Volume
3, WP 0363)
3.
Select Dearborn Protocol
Adapter (DPA 4+) USB for the
Readings Adapter, and select
OK. (Volume 3, WP 0363)
4.
Select Engine Control Unit
(ECU) Only. (Volume 3,
WP 0363)
5.
Under Connected Data Points,
select ECU - (shown with
engine serial number).
(Volume 3, WP 0363)
6.
Under ECU - (shown with
engine serial number), select
ECU - Data List - All. (Volume
3, WP 0363)
7.
Under ECU - Data List - All,
select Water in Fuel Input
Voltage. (Volume 3,
WP 0363)
0019-4