TM 5-3805-294-23-1
0135
Table 1. DTC 13308.02 - Abnormal CAN Communication - Continued.
Test or Inspection
Corrective Action
Malfunction
3.
Visually inspect ICF for
1.
If damaged or has loose pins,
damage or loose pins.
replace ICF. (Volume 4,
WP 0513) Restore machine to
original condition.
2.
If not damaged and does not
have loose pins, proceed to
Malfunction 3.
Visually inspect connector
1.
If damaged or has loose
3.
Connectors X34
sockets, replace cab wiring
Has Damage or
X34. (Volume 5, WP 0800,
harness. (Volume 4,
Loose Sockets.
Figure 98)
WP 0504) Restore machine to
original condition.
2.
If not damaged and does not
have loose sockets, proceed to
Malfunction 4.
1.
Remove monitor controller
4.
Monitor Controller
Has Damage or
(MON). (Volume 4, WP 0518)
Loose Pins.
2.
Visually inspect MON for
1.
If damaged or has loose pins,
damage or loose pins.
replace monitor controller.
(Volume 4, WP 0518) Restore
machine to original condition.
2.
If not damaged and does not
have loose pins, proceed to
Malfunction 5.
Visually inspect X20. (Volume
1.
If damaged or has loose
5.
Connector X20 Has
sockets, replace monitor
Damage or Loose
5, WP 0800, Figure 87)
controller wiring harness.
Sockets.
(Volume 4, WP 0519)
If not damaged and does not
2.
have loose sockets, proceed to
Malfunction 6.
Visually inspect X19. (Volume
1.
If damaged or has loose
6.
Connector X19 Has
sockets, replace monitor
Damage or Loose
5, WP 0800, Figure 86)
controller wiring harness.
Sockets.
(Volume 4, WP 0519) Restore
machine to original condition.
2.
If not damaged and does not
have loose sockets, proceed to
Malfunction 7.
0135-2