TM 5-3805-294-23-1
0136
Table 1. DTC 13311.03 - Fuel Level Sensor Short Circuit - Continued.
Test or Inspection
Corrective Action
Malfunction
3.
Visually inspect connector B18
1.
If damaged or has loose
for damage and loose sockets.
sockets, replace machine
wiring harness. (Volume 4,
WP 0516) Restore machine to
original condition. Clear and
refresh DTCs. (Volume 3,
WP 0362)
2.
If not damaged and does not
have loose sockets, proceed to
Malfunction 2.
Visually inspect fuel level
1.
If damaged or has loose pins,
2.
Fuel Level Sensor
sensor for damage and loose
replace fuel level sensor.
Has Damage or
Loose Pins.
pins. (Volume 5, WP 0800,
(Volume 3, WP 0478) Restore
Figure 13)
machine to original condition.
Clear and refresh DTCs.
(Volume 3, WP 0362)
2.
If not damaged and does not
have loose pins, proceed to
Malfunction 3.
Perform fuel level sensor test.
1.
If passed test, proceed to
3.
Fuel Level Sensor
Malfunction 4.
Faulty.
(Volume 3, WP 0342)
2.
If failed test, replace fuel level
sensor. (Volume 3,
WP 0478) Restore machine to
original condition. Clear and
refresh DTCs. (Volume 3,
WP 0362)
1.
Remove monitor controller.
4.
Connector X21 Has
Damage or Loose
(Volume 4, WP 0518)
Sockets.
2.
Visually inspect connector X21
1.
If damaged or has loose
for damage and loose
sockets, replace monitor
controller wiring harness.
sockets. (Volume 5, WP 0800,
Figure 88)
(Volume 4, WP 0519) Restore
machine to original condition.
Clear and refresh DTCs.
(Volume 3, WP 0362)
If not damaged and does not
2.
have loose sockets, proceed to
Malfunction 5.
0136-2