TM 5-3805-294-23-4
FIELD MAINTENANCE
HYDRAULIC PUMP COMPARTMENT DOOR LATCH, AND ISOLATOR REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Lockwasher (Volume 5, WP 0798, Table 1, Item
(Volume 5, WP 0796, Table 2, Item 119)
17) Qty: 4
Drill (Volume 5, WP 0796, Table 2, Item 55)
Rivet (Volume 5, WP 0798, Table 1, Item 148)
Drill Bit Set (Volume 5, WP 0796, Table 2, Item
Qty: 6
55)
Gloves, Rubber (Volume 5, WP 0796, Table 2,
Personnel Required
Item 55)
Construction Equipment Repairer 91L (2)
Tool Kit, Blind Rivet (Volume 5, WP 0796, Table 2,
Item 55)
References
TM 5-3805-294-24P: Fig. 135 (Volume 5,
Materials/Parts
WP 0794)
Adhesive (Volume 5, WP 0797, Table 1, Item 1)
DA FORM 5988-E or DA FORM 2404 (Volume 5,
Cleaning Compound, Solvent
WP 0794)
(Volume 5, WP 0797, Table 1, Item 46)
Rags, Wiping (Volume 5, WP 0797, Table 1, Item
34)
Equipment Condition
Machine safely parked and shut down
(TM 5-3805-294-10). (Volume 5, WP 0794)
Time to Complete
1.0 Hour(s)
DOOR REMOVAL
NOTE
An assistant will be needed to help support door during removal.
1.
With the aid of an assistant, remove four nuts (Figure 1, Item 1), lockwashers (Figure 1, Item 2), washers
(Figure 1, Item 3), and door (Figure 1, Item 4) from hydraulic pump compartment rear vertical cover (Figure 1,
Item 5). Discard lockwashers.
0598-1