TM 5-2420-230-24-1
4-14. REMOTE SHIFT VALVE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Pan, drain, Item 29, Appendix B
TM or Para
Condition Description
Tool kit, common no. 2, Item 36, Appendix B
Engine access panel removed.
Tool kit, general mechanics, Item 38, Appendix B
Fire wall cover removed.
Hood raised.
Materials/Parts
Hydraulic pressure relieved.
Cap and plug set, Item 4, Appendix C
Tags, identification, Item 63, Appendix C
Drawings Required
Ties, cable, Item 68, Appendix C
TM 5-2420-230-24P Figure 89
Washer, lock, Item 281, Appendix D (4)
TM 5-2420-230-24P Figure 93
Washer, lock, Item 285, Appendix D
Personnel Required
Estimated Time to Complete
MOS 62B, Construction Equipment Repairer
Refer to MAC in Appendix B
a. Removal.
Hydraulic fluid (Dexron III) is TOXIC. Wear
protective goggles and gloves; use only in
well ventilated area; avoid contact with skin,
eyes, and clothes. Skin and clothing that
come in contact with hydraulic oil should be
washed immediately. Saturated clothing
should be removed immediately. Failure to
comply may result in injury to personnel.
NOTE
Tag all hoses and wires, and note their
positions before removal.
Remove cable ties as necessary.
Cap and plug all tubes, hoses and fittings
upon removal.
(1)
Position drain beneath inlet line (1), and
remove inlet line from FEL valve block (2).
Change 1