TM 5-2420-230-24-1
5-15. DRAG LINK REPLACEMENT.
This Task Covers:
a. Inspection
b. Removal
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Test Equipment
None
TM or Para
Condition Description
Vehicle positioned on level
Tools and Special Tools
ground.
Tool kit, common no. 2, Item 36, Appendix B
Parking brake applied.
Tool kit, general mechanics, Item 38, Appendix B
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
"Do Not Operate" tag attached
Pin, cotter, Item 171, Appendix D (2)
to ignition switch.
Personnel Required
Drawings Required
MOS 62B, Construction Equipment Repairer (2)
TM 5-2420-230-24P Figure 112
References
None
Estimated Time to Complete
Refer to MAC in Appendix B
a. Inspection.
The inspection procedure for steering linkages may require two maintenance personnel: one to move steering wheel and
one to observe movement of steering linkages.
Inspect drag link for excessive backlash or free play using the following procedure:
(1)
Ensure front tires have correct air pressure (TM 5-2420-230-10)
(2)
Inspect drag link and tie rod for signs of damage and/or looseness. Replace as necessary.
(3)
Start engine and release parking brake (TM 5-2420-230-10).
(4)
With the aid of an assistant, move steering wheel from left to right and observe drag link ball joints for excessive
movement. Replace drag link as necessary.
(5)
Shut OFF engine (TM 5-24240-230-10).
Change 1