TM 5-2420-230-24-1
b. Adjustment.
(1)
Remove steering damper from tie rod (Para 5-18).
(2)
Remove nut (13), washer (14), and bolt (15) from left collar locking clamp (16).
(3)
Remove nut (17), washer (18), and bolt (19) from right collar locking clamp (20).
(4)
Adjust tie rod (21) to achieve a 0.08-in. (2 mm) toe-in reading on scale (12) and adjustable pointer (8).
(5)
Install bolt (19), washer (18), and nut (17) on right collar locking clamp (20).
(6)
Install bolt (15), washer (14), and nut (13) on left collar locking clamp (16).
(7)
Install steering damper on tie rod (Para 5-18).
(8)
Remove toe gauge (3).
(9)
Perform axle stop adjustment (Para K-4).
c. Follow-On Maintenance.
(1)
Lower vehicle (Para 2-22).
(2)
Start engine and perform road test (TM 5-2420-230-10).
(3)
Shut OFF engine (TM 5-2420-230-10).
(4)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
5-41
