TM 5-2420-230-24-1
12-11. STARTER MOTOR REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
TM or Para
Condition Description
None
Hood raised.
FEL arms raised and
Tools and Special Tools
maintenance arm installed.
Tool kit, common no. 2, Item 36, Appendix B
Right fender removed.
Tool kit, general mechanics, Item 38, Appendix B
Cooling system drained.
Materials/Parts
Drawings Required
Tags, identification, Item 63, Appendix C
TM 5-2420-230-24P Figure 50
Ties, cable, Item 68, Appendix C
Estimated Time to Complete Task
Refer to MAC in Appendix B
Personnel Required
MOS 62B, Construction Equipment Repairer
References
None
a. Removal.
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry or tools contact positive
electrical circuits, a direct short may result.
Damage to equipment and injury or death to
personnel may occur.
NOTE
Tag all wires and note their positions before
removal.
Remove cable ties as necessary.
(1)
Disconnect hose at transmission oil cooler.
(2)
Remove nut (1) and washer (2) from starter (3).
NOTE
If vehicle has cold weather kit, remove four wires from starter.
(3)
Remove three wires (4) from starter (3).
(4)
Remove nut (5) and washer (6) from starter (3).
(5)
Remove wire (7) from starter (3).
(6)
Remove three bolts (8) from starter (3).
(7)
Remove starter (3) from engine.
Change 1