TM 5-2420-230-24-1
b. Installation.
NOTE
Ensure all wires are reconnected to
positions noted prior to removal.
Position holder as noted prior to removal.
(1)
Position holder (5) on glow pin (7).
(2)
Install holder (5) on air blower (6) with flame
sensor (4).
(3)
Using an electrical contact tool, install two
wires (2) on connector (3).
(4)
Install exhaust cover (1).
c. Follow-On Maintenance.
Install control unit (Para 20-7).
END OF TASK
Change 1
20-30
