TM 5-2420-230-24-1
20-10. GLOW PIN REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Tool, electrical contact, Item 27.1, Appendix B
TM or Para
Condition Description
Tool, electrical contact, Item 27.2, Appendix B
Control unit removed.
Tool kit, common no. 2, Item 36, Appendix B
Tool kit, general mechanics, Item 38, Appendix B
Drawings Required
TM 5-2420-230-24P Figure 207
Materials/Parts
Lining and O-rings, Item 97.1, Appendix D
Tags, identification, Item 63, Appendix C
Estimated Time to Complete Task
Ties, cable, Item 68, Appendix C
Refer to MAC in Appendix B
Personnel Required
MOS 62B, Construction Equipment Repairer
a. Removal.
NOTE
Tag all hoses and wires and note their
positions before removal.
Remove cable ties as necessary.
(1)
Remove exhaust cover (1).
(2)
Using an electrical contact tool, remove two
wires (2) from connector (3).
(3)
Hold glow pin connection (4) and remove
glow pin (5) from glow pin connection.
(4)
Remove flame sensor (Para 20-8).
Change 1