TM 5-3805-294-23-4
FIELD MAINTENANCE
STARTER PROTECTION WIRING HARNESS REPLACEMENT
INITIAL SETUP:
Equipment Condition (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Negative battery cable disconnected. (WP 0521)
Cooling compartment lower access cover
(Volume 5, WP 0796, Table 2, Item 119)
removed. (WP 0591)
Pump compartment lower access cover removed.
Materials/Parts
Tags (Volume 5, WP 0797, Table 1, Item 52)
Engine compartment lower access cover removed.
Tie Wraps (Volume 5, WP 0797, Table 1, Item
56)
Lockwasher (Volume 5, WP 0798, Table 1, Item
Time to Complete
17) Qty: 3
3.8 Hour(s)
Lockwasher (Volume 5, WP 0798, Table 1, Item
56) Qty: 2
Locknut (Volume 5, WP 0798, Table 1, Item 100)
Qty: 3
Personnel Required
Construction Equipment Repairer 91L (1)
References
TM 5-3805-294-24P: Fig. 73, Fig. 89 (Volume 5,
WP 0794)
DA FORM 5988-E or DA FORM 2404 (Volume 5,
WP 0794)
Equipment Condition
Machine safely parked and shut down
(TM 5-3805-294-10). (Volume 5, WP 0794)
REMOVAL
WARNING
Ensure electrical power is off prior to working on all electrical connections. Prior to working
on or around vehicle, remove all jewelry, such as rings, ID tags, bracelets, etc. Jewelry, and
tools can catch on equipment, contact positive electrical circuits, and cause a direct short,
severe burns, or electrical shock. Failure to comply may result in injury or death to personnel.
0528-1